Advertisement
INSTRUCTIONS FOR USE
• Towel dry and detangle the hair.
• Dry hair as normal.
• Always ensure your hair is completely dry before using the straightener. Never
use the straightener on wet hair.
• Plug the straightener into a suitable mains socket. Press and hold the
button for 1-2 seconds to turn the straightener on and select the desired
temperature by pressing the + or - buttons.
• There are twelve temperature settings, as a guide:
- Use the lower temperature settings (180-195°C) on fine, damaged or
coloured hair.
- Use the medium temperature settings (200-215°C) on normal hair.
- Use the higher temperature settings (220-235°C) on thicker, coarser hair.
• Allow the straightener to heat up for 15 seconds. Allow slightly longer if using
on the higher temperature settings.
• Activate the Sensor Protect™ technology by pressing the 'Protect' button for
enhanced heat protection.
• After use, press and hold the
straightener and unplug from the power point.
button for 1-2 seconds to switch off the
Advertisement
