Re-packing your Deckvest CENTO See video at www.spinlock.co.uk B C D E F Concertina bladder onto itself ensuring a smooth flow for the manual lanyard. Remove all air. Place firing head in mesh pocket. C D E F Pull zips out.
Approval conditions CORRECTING PRESSURE VARIANCE Re-arming your Deckvest CENTO Inflating and deflating your Deckvest CENTO With variations in air or water temperatures, topping up by oral inflation may be required to maintain full buoyancy especially after prolonged immersion. Maintaining your Deckvest CENTO...
(EN) English WARNING: Safety Notices If in doubt, send your Deckvest CENTO to your nearest service centre for Use with an approved personal safety line only. evaluation and/or servicing. Attach to Jack line / fixed eyes. Anchorage points must be able to withstand forces of more than 1...
RESPONSIBILITY In exceptional circumstances, wear or damage Spinlock is not responsible for the consequences, could occur on the first use which reduces the direct, indirect or accidental, or any type of (EN) Storage (NL) Berging lifetime of the product to that one, single use.
Page 7
Please register your Deckvest CENTO serial number now at: www.spinlock.co.uk ESSENTIAL INFORMATION: DO NOT REMOVE UNTIL SOLD. It is essential you read these instructions before using your Deckvest CENTO. WARNING: WHEN NOT CORRECTLY FITTED, THIS PRODUCT MAY NOT PERFORM AS A LIFEJACKET, RISKING SERIOUS DANGER TO THE USER.
Need help?
Do you have a question about the Deckvest Cento and is the answer not in the manual?
Questions and answers