Advertisement
Quick Links
1. Package contents
-
Ingenico Move/5000
-
Power supply
-
Manual
-
Paper roll
2. The payment terminal
3. Installing and starting the terminal
1.
Plug the supplied charger cable into the power supply intput on the left side of the
terminal.
2.
Plug in the charger. The terminal will start immediately. If the terminal does not start
within 10 seconds, you can press the green 'OK' button to start it.
For more questions go to help.emspay.eu or call: 0800-3678324
Manual
Ingenico Move/5000
1
Contactless card reader
2
Paper roll compartment
3
Extra paper function button
4
Function button
5
Stop button
6
Correction button
7
OK button
Any transaction - any way EMSpay.nl
Advertisement
Summary of Contents for EMS Ingenico Move/5000
- Page 1 Manual Ingenico Move/5000 1. Package contents Ingenico Move/5000 Power supply Manual Paper roll 2. The payment terminal Contactless card reader Paper roll compartment Extra paper function button Function button Stop button Correction button OK button 3. Installing and starting the terminal Plug the supplied charger cable into the power supply intput on the left side of the terminal.
- Page 2 4. Use of the payment terminal Turning on and off When the power supply is connected, the payment terminal will start automatically. If the power supply has been removed, the terminal can be started by pressing the green 'OK' button for a few seconds. The terminal can only be switched off when it is disconnected from the power supply.