Table of Contents
Advertisement
f
1
220-24C)V.
Unplug the aerial cable
trorn your
TV receiver
and reconnect it to the terminal marked
El
Connect the other end of this aerial output
cable to the TV receiver,
r,
4
Plug the ~wer cord (supplied) into the VCR
power socket. Insert the plug straight and
firmly.
Insert the plug of this power cord into the wall
outlet.
U Both video and audio [monaural) signals are fed
to the TV receiver and can be viewed by setting
the TV receiver to your preset video channel (see
page $$).
AV ctmrmction
If your TV receiver has audiolvideo input terminals,
the fa[lowing AV connection is also possible. The
advantage
of this c~.nw+c-tion is a
higher
quality of
picture and
sound Amng
playback. The AV cable is
sold separately,
1
Chnrectthe AV cable to the
AUDION}DEO
OUT
terminals on the VCR,
n z
Connect the other end of this AV cable to the
~
audio&ideo terminals on the TV receiver.
El
Both video and audio (monaural) signals are fed
to the TV receiver and can be viewed by setting
the TV receiver to the AV mode
When you play back a tape, set the TV receiver to
the AV mode.
2
Advertisement
Table of Contents
