Table of Contents
Advertisement
3
BASIC O PERATION
15
I
Before starfing
.
I
Insert a video cassetie with erasure-prevention
tab,
Turn on the TV then set it to the? preset video
channel or AV mode.
'
,,,",,,
c&?&&:
."'""""'""li&l
&&'
:+7
nm&&.
u
?!5
".".:'
"m
Normal re~ording
Press the numeric bu~ons, or the (+ or -)
button, to select the prooramme ~cwition
number to be record'ed.-
&@mp!e:
Programme position number
"2"
H
Press the *REC button,
* Video recording starts.
Mis+msum
prevention eject
The cassette will automatically be ejected if
recording is attempted on a video cassette without
an erasure-prevention tab,
H you vvish to avoid rtseorciinQ unwanted
material
@ During recording, press the #lPAUSE/STILL
button.
The TV picture and sound will not be recorded.
@Press the #lPAUSEISTILL button or .REC
button, and the recording will resume,
Note:
If the record pause mode continues for about five
minutes, the VCR will automatically go into the stop
mode in order to prevent damage to the tape.
El!i
To stop the recording, press the 9STOP
button.
Auto rewind
The VCR automatically rewinds the tape when it
reaches the end. This function does not operate with
timer recording or CISRtimer recording.
Quick Wart Recording (QSR) timer
Timer recording is simple.
You can start a recording and then programme when
the VCR is to stop recording and go to stand-by
mode automatically,
Alofe:
Be sure that the set date and time are correct.
Press the .REC
button twice.
RlllEm
V&thin 10 seconds, set the recording end time
by using ORE(2 and (+ or-) buttons.
(*REC):
unitsof 30 minutes
(+, -) : units of 1 minute
0 The timer indicator (PI) will light after the
recording end time is set.
•l To stop the recording at any time, press the
W$TOP button.
Checting/Changing
When the OREC button are pressed during QSR
recording. the recording end time will blink for 10
seconds.
The recording end time can be changed by pressing
@REC and (+ or -) buttons during this 10-second
period,
FW!cording one prograrnme while watching
another
@Stan recording the desired TV programme
selected on the VCR.
~ Select on the TV receiver the programme you
want to watch.
Advertisement
Table of Contents
