Tow Starting/Towing - Audi A6 Quattro 2008 Maintenance Procedures

Hide thumbs Also See for A6 Quattro 2008:

Floor jack

NOTE:

On vehicles with air suspension, vehicle lifting mode must be reset before

lifting with floor jack to prevent unexpected air suspension regulation

measures.

Always use a suitable rubber or wooden block between the jack and the vehicle.

A floor jack must be attached only at the mounting points depicted in the illustration.

Do not lift the vehicle at the engine oil pan, transmission, or on front or rear axles as serious damage may result.

Lifting points for lifting platform and floor jack

Fig. 123: Identifying Lifting Points For Lifting Platform And Floor Jack

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Front and rear:

At plastic recesses on vehicle underbody marked in red.

TOW STARTING/TOWING

NOTE:

If air suspension shock absorbers in one axle lose pressure completely,

the vehicle does not have enough ground clearance. The vehicle must not

be moved in this condition. To drive onto a car transporter or a lift, for

FIXYOURCAR

2008 Audi A6 Quattro

Maintenance Maintenance Procedures

2:27:41 AM

Page 93