Page 1
Bluetooth Speaker with Drum MODEL NO.: SP770 INSTRUCTION MANUAL FCC ID: RSB-SP770 * The picture is only provided for reference. Please refer to the actual unit! SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.
Instructions for use Please read all instructions carefull Getting started Remove the unit from the box Remove any packaging from the product Place the packaging inside the box and store for safekeeping In the box Bluetooth Speaker with Drum Kit AC/DC Adaptor Instruction Manual Drum sticks...
Product Diagram TOP: VOL- VOL+ PLA Y MUSIC.VOL MIC ECHO 62Hz 250 Hz 1KHz 4KHz 16KHz MIC/ GT.VOL...
Page 4
MIC.IN Microphone input GT.IN Guitar input STANDBY Switch device into/out of standby mode VOL- Reduce volume of drum effects Drum pad Drum pad (Closed Hi-hat) Drum pad Drum pad (Ride) Drum pad Drum pad (TOM2) Drum pad Drum pad (TOM1) Drum pad Drum pad (Crash cymbal) Drum pad...
Page 5
FM antenna FM antenna Power switch Switch device of/off DC in socket power supply (DC 15V)
INSTRUCTION FOR USE Connecting the power Plug the DC jack of AC/DC adaptor into the DC socket of the unit. Turning on/off the speaker Switch the POWER switch on the rear of the speaker to the ON position to switch the device on.
Page 7
Bluetooth and bt flashes on the screen. Switch on the Bluetooth function on your audio output device and enable search mode. · SYLVANIA SP770 On your audio output device select your speaker from the list of available devices and link the devices. You may find more information about the Bluetooth function of your playback device in its operating instructions.
Page 8
Inserting SD memory card Insert the SD memory card into the slot on the top of the party speaker. The card’s contacts show towards the front of the device. Sd will appear in the display. Please note the following when connecting an SD memory card: ·Due to the numerous different memory cards on the market, compatibility with the connected memory media cannot be guaranteed.
DO’S and Don’ts Read the following recommendations before using the speaker. Following these you will be able to enjoy the product for many years. ·Don’t use abrasive cleaning solvents to clean the speaker. ·Do not expose the speaker to extremely high or low temperature as this will short- en the life of electronic devices, distort certain plastic parts.
Page 10
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including the interference that may cause undesired operation. For service assistance and product information, please call: 1-800-968-9853. Curtis international Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3...
Need help?
Do you have a question about the SP770 and is the answer not in the manual?
Questions and answers