LEFT & RIGHT PANEL (See 3)
1 Projection lens
2 REVERSE PROJECTION
3 PROJECTION ON/OFF
4 ROTATE PROJECTION
5 SET ALARM 1 / PRESET 1
6 SET ALARM 2 / PRESET 2
7 MINUTE + / PRESET 3
8 SET TIME / PRESET 4
9 HOUR + / PRESET 5
POWER SUPPLY
Batteries (not included)
1 Open battery door and insert four batteries (preferably PHILIPS POWER LIFE or
alkaline), type R6, UM3 or AA as indicated in the compartment.
2 Remove the batteries from the set if they are exhausted or not be used for a
long time.
• When you replace batteries, the preset stations, alarm and clock time set-
tings can be stored for up to 3 minutes. (see 'Self-Powered Back-Up').
Batteries contain chemical substances, so they should be disposed of
properly.
Mains adapter
1 Connect the mains adapter to the set's DC 7.5V socket and to the power
socket.
™
indicates the set is now adapter operated.
–
turns time/hour digits upside down(AC-powered only)
–
switches the projection on/off
–
adjusts projection slightly to a different angle
–
sets ALARM 1 time
–
stores, recalls and shows station 1
–
sets ALARM 2 time
–
stores, recalls and shows station 2
–
adjusts the minutes for clock and alarm times
–
stores, recalls and shows station 3
–
sets the clock time
–
stores, recalls and shows station 4
–
adjusts the hours for the clock and alarm times
–
stores, recalls and shows station 5