Advertisement
Introduction
We are glad that you have chosen a LINDY product and thank you for having placed your trust
in us. You can rely on our products and our good service at any time.
This LINDY USB 2.0 Cat.5 Extender 50m is composed of a transmitting and a receiving unit
with 4 USB ports and enables a USB host device to send data up to 50 metres. It is powered
over RJ45 which means that when the included power supply is connected to the transmitter, so
no power supply is required for the receiver, allowing for discreet installation.
Package Contents
• Local/Transmitter Unit
• Receiver Unit
• USB 2.0 A/B male cable (approximately 50cm)
• Multi-Country Power Supply, 24V 0.5A
• LINDY Manual
Features
• Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
• Integrated four port USB hub
• Supports distances up to 50 meters using Cat.5e (or better) UTP/STP cables
• True plug and play without any driver installation
• Supports all major Operating Systems with USB support
• Transmitter and Receiver units both feature integrated mounting brackets
Technical Specifications
• Transmitter: Input Port 1 x USB 2.0 B, Output Port 1 x RJ45, Socket for PSU
• Receiver: Input Port 1 x RJ45, Output Port 4 x USB 2.0 A
• Dimensions: 5.8 x 6.7 x 2.3cm (Transmitter), 11 x 6.4 x 2.3cm (Receiver)
• Weight: 91g / Transmitter, 160g / Receiver
• Temperature Range: 0° - 40° C (operating), -10° - 70°C (storage)
• Humidity: max. 80% (operating), max. 95% (storage)
Installation
1.
Connect the transmitter to a USB port on the host computer by using the included USB
cable.
2.
Connect the power adapter to the transmitter unit.
3.
Place the receiver unit near the USB device(s) in the desired remote location.
4.
Connect the transmitter to the receiver unit by using a Cat.5e (or better) cable (not
included!).
[1]
Advertisement
