Self Diagnosis Function; Dc_Det - Sony KLV-32W400A Service Manual

Ex1 chassis

Install manual (6 pages)

Brochure (2 pages)

Operating instructions manual (40 pages)

Table of Contents

The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash.

The number of times the LED flashes translates to a probable source of the problem.

A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user's knowledge and reference.

If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to

reveal past problems and how often these problems occur.

1-1. DIAGNOSTIC TEST INDICATORS

When an error occurs, the STANDBY LED will flash a set number of times to indicate the possible cause of the problem.

If there is more than one error, the LED will identify the first of the problem areas.

Result for all of the following diagnostic items are displayed on screen.

If the screen displays a "0", no error has occurred .

Number of times STANDY LED

(Red) flashes

2 times

3 times

4 times

5 times

6 times

7 times

8 times

10 times

11 times

12 times

13 times

1-2. DISPLAY OF STANDBY/TIMER LIGHT FLASH COUNT

STANDBY LED

1-3. STOPPING THE STANDBY FLASH

Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY LED from flashing.