Advertisement
3.4 Power on the device, the system will automatically runs in 1~2
minutes.
Attention:
1)
Do not insert the SIM card or remove it if power is
connected to the device.
2)
Please use the power adapter that came with the device.
4. Quick Config Guide
Connect your PC/Laptop/Mobile to the router via Ethernet port or
WIFI. The router supports Windows XP, Windows 7/8/10, MAC OS,
Linux, Android and so on.
Regarding the router's SSID and WIFI password information, pls see it
in the indoor AP's sticker. No matter what way to connect, please make
sure to set the mode: obtain IP address automatically.
First Step：
Input CPE IP address(192.168.0.1) into the browser, press"enter"to
access CPE home page.
Second step：
If the router auto recognize the APN and already connect to
internet, then you do not need to add APN info.
If the router does not recognize the APN, then you need to add
APN manually. Pls select Device Settings--WAN Settings--APN,
fill in the APN info. Pls make sure the APN setting is correct.
Incorrect APN will cause internet connection failed.
5. Router Setting
If the device works fine, you'd better not change the parameter or
other function. If you changed it and cannot access Internet or have
poor experience, please press and hold the reset button for more
than 7 seconds to restore the factory settings.
Menu 1
Menu 2
Description
Home
Router running status info, such as
gateway
running hours, LTE network, SIM,
information
WAN, LAN, WLAN info
status
Online
terminal
Current terminal connections, MAC, IP
System
status
status
Traffic
Traffic statistics
Statistics
Version
Check the router's software and
info
hardware version number.
Check LTE details info, including
LTE info
frequency, cell, RSRP, SINR, RSRQ
etc.
Network selection: Auto, 4G Prefer, 4G
Only, 3G Prefer, 3G Only, etc.
Device
WAN
APN Setting
Setting
Setting
IPV4 / IPV6: Set router IP stack
support model
SMS
function
Firewall
System
manage
ment
The default setting is
.
IPV4 / IPV6 dual stack.
PIN, MTU, DNS Settings
Enable and disable wifi.
WLAN
View and change WiFi SSID,
Setting
password, encryption and channels
DHCP: Set the router's DHCP info and
IP info. Once turn off the DHCP, the
DHCP
user has to set IP manually, and it can
not obtain the IP automatically.
Keep address
IPV6 address allocation, PNAT
IPV6 set
function.
New
Creating a new message
message
Inbox
Inbox
Draft
Draft
Sent
Sent
Ports filtering, IP address filtering,
Filtering
URL Filtering,.
Rules
MAC binding,
Speed limit
IP speed limit
System
Change password, username, device
setting
reboot settings and runtime.
System log
Check system work log
Reboot
Support reset router
System
Update the firmware
update
Module
LTE module software update
update
Config
Update router system setting
update
Restart
User can restart router
device
Advertisement
