Advertisement
Bit is considered
worn when the
with
tube.
Shims
Carriage Head
will
become loose due
to remove
"play."
Vacuum Seal
Replace
Vacuum
Seal
if
it
Diamond Products warrants all equipment manufactured by it against defects
in workmanship or materials for a period of one (1) year from the date of
shipment to Customer.
The responsibility of Diamond Products under this Warranty is limited to
replacement or repair of defective parts at Diamond Products' Elyria, Ohio
factory,
or at a point designated by
inspection at such point, to have been defective in material or workmanship,
with expense for transportation and labor borne by Customer.
In no event shall Diamond Products be liable for consequential or
incidental damages arising out of the failure of any Product
Integral units such as engines, electric motors, batteries, transmissions,
etc., are excluded
manufacturer's
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY
DISCLAIMED.
crown shows
to
vibrations.
becomes
mushroomed-
on bottom
EQUIPMENT AND PARTS
WARRANTY
from
this Warranty and are subject to the prime
warranty.
9
excessive
wear
and has become
Tighten Shim Adjusting
edge,
cracked,
pitted,
it,
of such parts as shall appear to us upon
flush
Screws
(Fig. 4)
or
worn.
to
operate properly.
Advertisement
