LG LF-K9350Q Owner's Manual page 16

Before Operation
AUDIO
Each DVD disc has a variety of audio output options.
Set the player's AUDIO options according to the type of
audio system you use.
AUDIO
5.1 Speaker Setup
DRC
Vocal
5.1 Speaker Setup
DVD
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output.
Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
AUDIO
Speaker Front L
Size Small
Volume 0 dB
Distance 0 m
Test
Off
Select Move
1. Press SETUP. The setup menu appears.
2. Use / to select the AUDIO option then press
to move to the second level.
3. Use / to select the Speaker Setup option then
press to move to the third level. "Select" is high-
lighted.
4. Press SELECT/ENTER and 5.1 Speaker Setup
menu appears.
5. Use / to select the desired speaker.
6. Adjust options using /
7. Press SELECT/ENTER to confirm your selection.
The unit returns to the previous menu.
Speaker
Select a speaker that you want to adjust. [Front speaker
(Front L), Front speaker (Front R), Center Speaker
(Center), Subwoofer (Woofer), Rear speaker (Rear L),
Rear speaker (Rear R)]
ote
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
16
Size
Press
• The size of the Front L/R speaker can be selected to
• The size of the Subwoofer can be selected to "Large"
• Since the size of the Center and Rear L/R speaker
Select
On
• If you have connected the system to a speaker with low
On
• If you have connected the system to a speaker
Move Select
Volume
Press
speaker. (-5dB ~ 5dB)
Distance
If you have connected speakers to your DVD Player,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time.
Press
speaker (Center, Rear L and Rear R).
Test
Select "All" to test the signals of each speaker.
Return ENTER
Adjust the volume to match the volume of test signals
memorized in the system.
(When the size of the Front L/R speaker is selected to
"Large", the subwoofer (Woofer) is not available.)
Front L → Center → Front R → Rear R →Rear L → Woofer
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
/ / buttons.
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing dialog intelligibility. Set
DRC to On for this effect.
Vocal
Set Vocal to On only when a multi-channel Karaoke
DVD is playing. The karaoke channels on the disc will
mix into a normal stereo sound.
/ to set a mode. (Large, Small or None)
"Large" or "Small".
or "None".
are fixed to "Small", you can not change settings.
frequency of 100Hz or below, select to "Large" the size
of the Front L/R speaker. The size of the Subwoofer is
selected to "None" automatically.
without low frequency of 100Hz or below, select to
"Small" the size of the Front L/R speaker. The size of
the Subwoofer is selected to "Large" automatically. But
if you haven't connected to subwoofer, always select to
"Large" the size of Front L/R Speaker.
/ to adjust the output level of the selected
/ to adjust the Distance of the selected
Notes
The DRC function works only during playback of
Dolby Digital recorded discs.
The level of Dynamic Range Compression may differ
depending on the DVD disc.
DVD
DVD