Procedure A: Setting Up Your Simulator - Nasco CPARLENE 3000 Series Instruction Manual

PROCEDURE A: SETTING UP YOUR SIMULATOR

Your simulator has been packed securely for safe shipment. Please
CPARLENE
®
follow these simple setup procedures.
Packing
1. Remove product from packaging.
2. Keep packaging materials for storage.
E.
D.
A. Chest Skin
B. Chest Plate
C. Upper Compression Plate
Torso
3. Unzip jacket, remove chest skin, chest plate, and upper compression plate.
Note: On electronic models, care should be taken when removing the chest plate and upper
compression plate to avoid damage to the electronics. (See figure 1.).
Springs
4. Insert springs (black/adult, or red/child) into the four plastic cylinders extending up from the
lower compression plate. (See figure 1.) Some models provide clamps inside the manikin
torso to hold additional springs when not in use.
Disposable Trachea
5. Before inserting disposable trachea, remove
longer white fitting from the lower end of
the tube. (See figure 2.)
B.
A.
F.
C.
Figure 1
D. Lower Compression Plate
E. Compression Springs
F. Electronic Connections
Figure 2
11