Advertisement
ASSEMBLING THE WINCH HANDLE
1) Assemble the winch handle (A) Fig.5 to the winch wheel by tightening the
handle bolt (B) with a screwdriver.
INSTALLING THE CRADLE ASSEMBLY TO THE TOP OF FRAME
1) Before attempting to install the cradle to the top of the frame, pivot the
retaining hook (A) Fig.6 downdards. This retaining hook is used to prevent the
telescopic posts from moving during transport or storage.
2) Lift the cradle (B) Fig.6 and insert the cradle post (C) into the telescopic post
opening (D). Make sure the cradle post slides all the way into the telescopic
post opening.
INSTALLING THE CROSSARMS TO THE CRADLE
1) The crossarms are interchangeable. Slide the tapered plate on the crossarm
(A) Fig.7 into one of the tapered sockets (C) on the cradle (B).
2) Push the crossarm forward into the socket until the spring tab on the bottom
of the crossarm snaps into place. Repeat for the second crossarm.
DRYWALL LIFT ASSEMBLY
FIGURE 5
FIGURE 6
FIGURE 7
Advertisement
