Euro-Pro SHARK STICK BROOM EP601X2 Cleaning

CLEANING THE DUST CUP FILTER

• Clean the dust cup filter when dust is over
the "MAX" line sign on the dust cup.
• Remove the dust cup filter.
• Wash the dust cup filter in lukewarm water
using a mild detergent and a soft brush.
• Dry the dust cup filter completely before
reinserting it into the dust cup.
• Replace the dust cup filter into the dust
cup.
Warning: Always empty the dust cup and clean the dust cup filter
before each use and during prolonged usage.
Never over fill the dust cup - remove dirt and clean the
dust cup filter during prolonged usage or risk motor
damage.
Make sure that the dust cup filter is completely dry
before inserting back in the vacuum.
Please Note: The Dust Cup Filter is washable. It should however
EURO-PRO CORPORATION
USA: 178 West Service Rd., Champlain, New York 12919,
CANADA: 4400 Bois Franc, St. Laurent, Quebec H4S 1A7, Tel.: (514) 842-8691 Fax: (514) 842-6985
SHARK STICK BROOM
Model EP601X2
be replaced every three months to ensure peak
performance of your vacuum.
Tel: (800) 798-7398 Fax: (514) 842-6985