Wall Mounting (Optional) - Duramaxx 10028182 Manual

1. Use three expanded bolts with the diameter 8mm and according to the right and left height
around 184 mm * 412 mm to fi x to the wall.
2. As the picture follows enclose the upper hitcher to the upper expanded bolt and then screw tight-
ly. Then enclose the locknut, sleeve and the below hitcher to the below expanded bolt and then
locknut.
3. Hang the machine to the wall and move it to the front to make the machine hang the hitcher tight.
Move the machine backward to deviate the machine from the hitch then take off the machine.
4. Check the machine stability and make sure the machine is safey then turn on the machine.

Wall Mounting (optional)

10