fitting instructions
4
1
With the SENSOR SIDE FACING
UP, pull the Support Strap
through each slit as shown.
NOTE: Support Strap should be
evenly distributed on each side.
2
With the sensor side still facing
up, grab the RIGHT side of
the Support Strap and slide
through the BOTTOM LEFT slit.
3
With the sensor side still
facing up, grab the LEFT side
of the Support Strap and slide
through the BOTTOM RIGHT slit.
NOTE: Support Strap should
form an X over sensor.
4
With the SENSOR SIDE FACING
UP, gently place your baby's
foot between the Monitor and
the X of the Support Strap.
See video instructions online at www.babyvida.us
5