Table of Contents
Advertisement
To deactivate the function: change the
heat setting.
4.6 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the cooking zone then set the
function.The selection of the Timer
function is possible for cooking zones
that are active and after the heat setting
is set.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on. When
this function is active,
To activate the function: touch
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time: set the cooking
zone with
. Touch
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking
zone deactivates.
To stop the sound: touch
CountUp Timer (The count up
timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone (if more than
1 cooking zone operates): touch
again and again until the indicator of a
necessary cooking zone comes on. When
this function is active,
comes on.
of
. The indicator of
or
.
and touch
. The
.
comes on.
To activate the function: touch
symbol
goes out and
To see how long the cooking zone
operates: set the cooking zone with
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates. During the first
minute the display shows the time in
seconds. After the first minute the
display shows the time in minutes.
To deactivate the function: set the
cooking zone with
. The symbol
goes out and
comes on.
If two functions operate at
the same time, the display
shows the CountUp Timer
function first.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate (the
heat setting display shows
To activate the function: touch
Touch
or
of the timer to set the
time. When the time comes to an end,
the sound operates and 00 flashes.
To stop the sound: touch
The function has no effect
on the operation of the
cooking zones.
4.7 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
ENGLISH
25
. The
comes on.
.
and touch
or
).
.
.
.
.
Advertisement
Chapters
Table of Contents
