About This Manual; Related Publications; Admonishments; General Safety Precautions - ADC ACE-142S/142V User Manual

Fiber distribution terminal cabinet
Table of Contents

Advertisement

ABOUT THIS MANUAL

This publication provides a complete description of the Fiber Distribution Terminal (FDT)
ACE-142S/142V Cabinet. Also included are procedures for mounting the cabinet, installing and
splicing the feeder and distribution cables, installing additional connector panels and splitter
modules, connecting the splitter output fibers to the distribution fibers, and replacing damaged
components.

RELATED PUBLICATIONS

Listed below are related manuals and their publication numbers. Copies of these publications
can be ordered by contacting the ADC Technical Assistance Center at 1-800-366-389, extension
73475 (in U.S.A. or Canada) or 1-952-917-3475 (outside U.S.A. and Canada).
Title
Round Splice Tray Cable Routing Instructions
Optical Fiber Systems Cleaning and Mating Instructions

ADMONISHMENTS

Important safety admonishments are used throughout this manual to warn of possible hazards to
persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use of
the triangular alert icon (seen below) and are listed in descending order of severity of injury or
damage and likelihood of occurrence.
Danger: Danger is used to indicate the presence of a hazard that will cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Warning: Warning is used to indicate the presence of a hazard that can cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Caution: Caution is used to indicate the presence of a hazard that will or can cause minor
personal injury or property damage if the hazard is not avoided.

GENERAL SAFETY PRECAUTIONS

Warning: Wet conditions increase the potential for receiving an electrical shock when
installing or using electrically-powered equipment. To prevent electrical shock, never install or
use electrical equipment in a wet location or during a lightning storm.
ADCP-96-015 • Issue 1 • July 2004 • Preface
ADCP Number
© 2004, ADC Telecommunications, Inc.
90-321
90-159
Page v

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ace-142sAce-142v

Table of Contents