Summary of Contents for Santec MONARCH CRYSTAL Series
Page 1
ITEM NUMBER 1155LC MONARCH CRYSTAL COLLECTION ROMAN TUB FILLER WITH HAND HELD SHOWER - “LC” HANDLES 11 11 PART DESCRIPTION PART # Complete Spout Assembly * PS-5M00S Complete LC Lever Handle Assembly * 00LC Roman Tub Spout Flange * PH2210 Quick Connect Spout Shank &...
1155LC _ _ INSTALLATION INSTRUCTIONS FLUSH BOTH SUPPLY LINES BEFORE INSTALLATION AFTER FLUSHING, SHUT OFF BOTH SUPPLY LINES MINIMUM HOLE SIZE FOR THE SPOUT AND HANDLE TRIM IS 1 ” AND MAXIMUM IS 1 ” SPOUT INSTALLATION Brass plate - Remove the Quick Connect Spout Shank and Mounting Hardware from the box. Remove the mounting hardware (metal washer and brass lock nut) from the Quick Connect Shank.
Page 3
- Make sure that the handle turns freely in both directions. ** The spout, handle valve bodies and diverter can be connected with flex hoses (not provide by Santec) or copper pipe soldering. Please note that when soldering connections, do not use excessive heat. Excessive heat can damage the joints increasing probability of leakage.
Page 4
Hand shower Diverter FROM COLD VALVE TO DIVERTER FROM DIVERTER TO SPOUT FROM HOT VALVE TO DIVERTER COLD WATER HOT WATER SUPPLY SUPPLY Santec Inc. 3501 Challenger Street, Torrance, CA 90503 Tel: (310) 542-0063 Fax (310) 542-5681 03/03 www.santecfaucet.com PAGE 04...