Lining Satellite Aerial Up - Xcruiser XS9900D User Manual

� Press the ▼- button to choose between the following points.
• LNB-type • Low L.O.F.
• Frequency • Symbol rate
� Press the ◄- or ►- button to select a LNB type..
� If you would like to enter a customised L.O.F. select the point "customised" and enter the low L.O.F. and high L.O.F.
frequency using the NUMERIC buttons.
� Input the frequency using the NUMERIC buttons. (press OK, you will see 00000, then you can input the umbers)
� Input the symbol rate using the NUMERIC buttons.(press◄- or ► first, then input the number you want)
� Press the ◄- or ►- button to select the polarisation.

Lining satellite aerial up

-> Press the FIND button to display the menu satellite finding.
� Choose a satellite.
� Turn the receiving dish as long as the LOCK- LED lights, or the joists of the signal level and signal quality are green.
Once a signal is found, the bar graph shows the signal strength and quality. In addition C/N, FEC and a.BER (after BER)
are displayed. In addition an acoustic signal is represented.
XS9900D Xcruiser Satellite-Meter
• High L.O.F.
• Polarisation
XS9900D
ENG- 22