Cassette Recorder; Cassette Playback - Philips AZ1116/10 User Manual

CD PLAYER
PROGRAMMING TRACK NUMBERS
Erasing a program
You can erase a program by:
– opening the CD door.
– setting the source selector to the TAPE or RADIO position.
– pressing STOP twice during playback/in the stop position.

CASSETTE PLAYBACK

1. Set the source selector to TAPE.
2. Press STOP•OPEN 9 / to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY 1 and playback will start.
5. Adjust the sound using the VOLUME, and DBB controls.
6. For brief interruptions, press PAUSE ;. Press PAUSE ; again to
resume playback.
7. By pressing 5 or 6, fast winding of the tape is possible in both
directions.
8. To stop playback, press STOP•OPEN 9 /.
– The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/POWER/OFF position (with the cas-
sette keys released) to switch off the set.
CASSETTE RECORDING
General information on cassette recording
– Recording is permissible insofar as copyright or other rights of third
parties are not infringed.
– This deck is not suited for recording on CHROME (IEC
(IEC IV) type cassettes. For recording you should use NORMAL type
cassettes (IEC I) on which the tabs have not been broken.
– The recording level is set automatically. Altering the VOLUME con-
trol or, DBB switch will not affect the recording in progress.
– No recording will take place during the first 7 seconds, when the
leader tape passes the recorder heads.
– To prevent the accidental erasure of a recording, keep the cassette
side to be safeguarded in front of you and break out the left tab.
Recording on this side is no longer possible.

CASSETTE RECORDER

II) or METAL
1
9