Table of Contents
Advertisement
CASSETTE RECORDER
CASSETTE PLAYBACK
1. Set the source selector to TAPE/OFF.
2. Press STOP•OPEN 9 / to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY 1 and playback will start.
5. Adjust the sound using the VOLUME control.
6. For brief interruptions, press PAUSE ;. Press PAUSE ; again
to resume playback.
7. By pressing 5 or 6,fast winding of the tape is possible in both directions.
8. To stop playback, press STOP•OPEN 9 /
™ The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/OFF position (with the
cassette keys released) to switch off the set.
CASSETTE RECORDING
General information on cassette recording
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II)
or METAL (IEC IV) type cassettes. For recording you should
use NORMAL type cassettes (IEC I) on which the tabs have
not been broken.
• Check and tighten slack tape before use with a pencil, to avoid
jamming the deck machanism.
• The recording level is set automatically. Altering the VOLUME control will not affect the
recording in progress.
Note : No recording will take place during the first 7 seconds of the tape.
• To prevent accidental erasure of a recording, keep the cassette side to be safeguarded in front
of you and break the left tab. Recording on this side is no longer possible.
18
1
Advertisement
Table of Contents
