Table of Contents
Advertisement
LANGUAGE LEARNING
This set features language learning functions based on CD, MP3-CD and tape playback modes.
To select your desired playback source, please adjust the source selector to TAPE, FM, MW or CD-PM3.
MUSIC MODE AND LANGUAGE LEARNING MODE
When the set is start for the first time, the set is in the music mode.
In this case, you can play CD, MP3-CD or tape.
Note : - CD playback is not in the compressed playback mode,
therefore the sound quality is not affected, but the language
learning function is not activated.
Press and hold MODE, and LANG ON and MANU are displayed.
•
™ The language learning function is activated.
Notes : - In the language leaning mode, you can press MODE to toggle between manual and auto.
- To provide the 120-second repeat function in the CD playback mode, all the data in the CD
will be first compressed and stored in the SD RAM for subsequent playback, therefore the
sound quality might be slightly affected.
- Once in the language learning mode, LANG ON will
disappear and MANU will remain flashing.
Press and hold MODE again and LANG OFF is displayed.
•
The language learning function is deactivated.
™ Both LANG ON and MANU disappear.
STORE THE CONTENTS PLAYED,AND START MANUAL LOOP, FOLLOW OR
COMPARE (LOOP, FOLLOW, COMPARE)
In the language learning mode, the contents played will be automatically stored in a Synchronous
Dynamic Random Access Memory (SD RAM).
The storage periods are different according to different playback sources:
Playback source
Tape
CD
MP3 128bpc
Notes : - For MP3-CDs of different bit rates, the storage periods may also be different. A smaller bit rate
implies longer storage time. A greater bit rate implies shorter storage time. (64bps = 960
seconds, 320bps = 240 seconds).
- When the SD RAM is full, the latest contents will overwrite the older data in the principle of
"First -in and first-out".
12
Storage period
440 seconds
120 seconds
440 seconds
CD
MANU
TRACK
CD
M
ANU
TRACK
Advertisement
Table of Contents
