Not possible to switch the device on
No sound, but the power supply indicator lights
Feedback or sound interruptions
Conversation or sound of another unit
Troubleshooting
Check the capacity of accumulator.
power adapter. Change batteries.
Check, if the volume is not too low. Units can
be out of range. The key "TALK" can be
pressed. Units are not paired.
Units too close to each other. Volume set for
maximum
accumulator can be discharged.
Unit probably receives signal from another
unit. Pair your units according to instructions
on page 10.
- 81 -
on
both
units.
Check
Batteries
or