Table of Contents
Advertisement
Operation:
On startup the LCD display will show 'Warming up >>>'. Once the heating up is finished it will then
display 'Ready to fog', which means the unit is ready for use.
Timer mode:
Press the
button on the unit to display 'Interval Set', you can now adjust the interval time from
MENU
1s to 200s by using the
Press the
button to display 'Duration Set', you can now adjust the output time from 1s to 200s
MENU
by using the
and
Press the
button to display 'Timer Out', you can now adjust the output volume from 1% to 100%
MENU
by using the
and
Press the
button to confirm the settings.
ENTER
Once set you can then use the
The display will show:
Interval:
___S followed by Duration: ___S with the settings previously applied.
Press the
button once to stop output.
ENTER
Manual mode:
Press the
button on the unit to display 'Volume Out', you can now adjust the output volume
MENU
from 1% to 100% by using the
Press the
button to confirm the settings.
ENTER
Once set you can then use the
The display will show:
Volume:
___% with the settings previously applied.
Press the
button once to stop output.
ENTER
DMX mode:
Press the
button on the unit to display 'DMX512 Address:', you can now adjust the DMX
MENU
address between 1 and 512 by using the
Press the
button to confirm the settings.
ENTER
You can then connect the DMX controller, the display will show:
'DMX512 Address:'
Channel
Value
Function
000-005
No function
CH1
006-255
Output volume (0-100%)
www.prolight.co.uk
and
buttons.
buttons.
buttons.
/
button to enable this mode.
TIMER
and
buttons.
/
button to enable this mode.
VOLUME
and
Operating instructions
buttons.
HP 3000 Stage Fogger User Manual
6
Advertisement
Table of Contents
