Welch Allyn Atlas ULTIMOUNT Installation Manual

Wall Mount Installation Guide
Using the ULTIMOUNT™ Wall Mounting System
WARNING: It is the health facility or other user's responsibility to assure that the ULTIMOUNT™ wall mounting
system is anchored to a wall securely and consideration must be given to the load that will be placed
upon the wall mount. Each ULTIMOUNT™ is labeled with a maximum load rating of 33 pounds. Do
not exceed this load limit.
WARNING: Welch Allyn, Inc. does not accept responsibility for any installation, nor for damage or injury arising from the
installation in any type of wall regardless of the type of fasteners and technique used.
WARNING: It is the responsibility of the user of the ULTIMOUNT™ wall mount to see that it is securely anchored to the
wall and that the Atlas™ monitor is securely fastened to the wall mount as directed below.
Tools Required:
Hardware Included:
Locking Pin
Basket
Track
Hardware
Track
Part No. 620426 Rev. A
Atlas TM
Phillips head Screw Driver
(1) Mounting Plate
(2) #8-32 Internal Tooth Lockwasher
(4) #10-32 Internal Tooth Lockwasher
5/32" Hexagon Wrench (provided)
(2) #8-32 Pan Head Phillips Screw - 3/8" long
(4) #10-32 Pan Head Phillips Screw - 1/2" long
Track Stop Screws
Locking Pin
Mounting Plate
Arm Assembly
Locking Pin Holes