Foot Control - Boss Acoustic Singer Live LT Owner's Manual

Panel Descriptions
Rear Panel
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
1
1
AC IN jack
Connect the included power cord.
2
MIX D.I. OUT jack
Connect this to your PA system or recorder.
You can use this in conjunction with an external PA system, or
to record your performance via direct line while monitoring
the sound from this unit.
5 Adjust the output level using the [VOLUME] knob of each
channel.
5 The sounds of the mic channel, the guitar channel, and the
audio input from the AUX INPUT jack are all mixed and output.
Pin assignment of MIX D.I. OUT jack
1: GND 2: HOT
1: GND
3: COLD
3
PHONES/REC OUT jack
Connect headphone.
5 To adjust the volume, each channel's [VOLUME] knob along
with the [MASTER] knob.
5 If a plug is inserted in the PHONES/REC OUT jack, no sound
will be output from the Acoustic Singer's own speaker. This is
convenient if you don't want loud sound to be produced from
the speaker, such as when you're practicing at night.
6
2 3
5
4

FOOT CONTROL

Connect a footswitch (sold separately: FS-6, FS-7, FS-5U).
MIC EFFECT jack
Lets you turn the mic channel effect on/off with your foot.
Switch Explanation
TIP: REVERB Turns REVERB on/off.
RING: EFFECT Turns DELAY or ECHO on/off.
GUITAR EFFECT jack
Lets you turn the guitar channel effect on/off with your foot.
Switch Explanation
TIP: REVERB
Turns REVERB on/off.
RING: EFFECT Turns DELAY or CHORUS on/off.
4
6 7