1. Manuals
  2. Brands
  3. Broadata Communications Manuals
  4. Transmitter
  5. LINKBRIDGE LBC-HDV-T
  6. User manual

Broadata Communications LINKBRIDGE LBC-HDV-T User Manual

Hdbase-t hdmi/displayport/vga transmitter with integrated control processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LINKBRIDGE™ HDBASE-T
HDMI/DISPLAYPORT/VGA
TRANSMITTER WITH INTEGRATED
CONTROL PROCESSOR
LBC-HDV-T-ICP / LBC-HDV-T
USER MANUAL
BCI reserves the right to make changes to the products described herein without
prior notice or consent. No liability is assumed as a result of their use or application.
All rights reserved.
©2019 Broadata Communications, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LINKBRIDGE LBC-HDV-T and is the answer not in the manual?

Questions and answers

Related Manuals for Broadata Communications LINKBRIDGE LBC-HDV-T

Summary of Contents for Broadata Communications LINKBRIDGE LBC-HDV-T

  • Page 1 LBC-HDV-T-ICP / LBC-HDV-T USER MANUAL BCI reserves the right to make changes to the products described herein without prior notice or consent. No liability is assumed as a result of their use or application. All rights reserved. ©2019 Broadata Communications, Inc.
  • Page 2 SAFETY INSTRUCTIONS AND COMPLIANCE DECLARATION PLEASE OBSERVE THE FOLLOWING SAFETY PRECAUTIONS SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes,surges,electric shock,lightning strikes, etc. Use of surge proctection system is highly recommended in order to protect and extend the life of your equipment.
  • Page 3 SAFETY INFORMATION Do not use this device near water/liquids. This device should not be exposed to dripping and splashing or liquids. Clean only with dry cloth. Do not use solvents such as paint thinners and acetone to clean external casing. Such agents will remove any labels on the device.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS PRODUCT DESCRIPTION OPERATION CONTROL AND FUNCTIONS FRONT/REAR PANEL CONNECTOR PIN OUT ASSIGNMENT CONFIGURATION- LBC-HDV-T API COMMANDS CONFIGURATION- LBC-HDV-T-ICP KEYPAD CONTROL TOUCH PANEL ALEXA VOICE CONFIGURATION SPECIFICATIONS MAINTENANCE AND TROUBLESHOOTING SERVICE PROCEDURE REPLACEMENT POLICY 10.0 RETURN AND REPAIR SERVICE 11.0 LIMITED WARRANTY 12.0...

  • Page 5: Product Description

    PRODUCT DESCRIPTION The LBC-HDV-T is a multi-format switcher with HDMI, VGA and DisplayPort inputs to HDBT output. The audio port is independent and could be embedded into any of the video signals and send it to the far end. The product supports webserver and can be controlled by the button, LAN, RS-232, contact closure, IR and RS-232 can pass through.

  • Page 6: Operation Control And Functions

    OPERATION CONTROL AND FUNCTIONS FRONT PANEL HDMI PWR LINK SELECT PWR: Solid red when powered on. HDMI: LED solid when HDCP is active, flashing when HDCP is not active. LINK: Flashing when HDBT connected without video signal, solid when video presented.
  • Page 7 OPERATION CONTROL AND FUNCTIONS BACK PANEL D H V LD 24V DC HDBT HDMI TX RX LV LH Power: 24V DC Power. HDBT Out: HDBT output. DisplayPort input. HDMI: HDMI input. VGA: VGA input. AUD: Independent audio input LAN: LAN for local control or web serve access Phoenix Port: RS-232 and Contact Closure with LED indicator HDBaseT HDMI/DisplayPort/VGA Transmitter with ICP User Manual (LBC-HDV-T / LBC-HDV-T-ICP)
  • Page 8 CONFIGURATION DC POWER CONNECTIONw ready to power up the LBC-HDV-T and set up your network connection. In order to make sure that you have a proper installation, please observe the following: Your AC jack has power. The 24VDC power supply is working. Your electrical system has proper grounding (this ensures that your power supply does not suffer from voltage variations).

  • Page 9: Connector Pinout Assignment

    CONNECTOR PINOUT ASSIGNMENT PHOENIX CONTACT CONNECTIONS DP Input HDMI Input VGA Input LED indicator for DP LED indicator for VGA LED indicator for HDMI RS-232 Tx RS-232 Rx BUTTON CON- D H V GND: Ground FIGURATION ON THE TOP MENU BAR CLICK ON CUS- TX RX LV LH...

  • Page 10: Configuration- Lbc-Hdv-T

    CONFIGURATION- LBC-HDV-T This section describes configuration of the standard version of the LBC-HDV-T. WEB SERVER The factory default IP: 192.168.2.175 Note: BCI product configuration program can be used to discover unit’s IP address. To access the product web server, user can direct connect the PC LAN port to the LBC-HDV-T LAN port with a straight RJ-45 cable.
  • Page 11 CONFIGURATION- LBC-HDV-T INPUT/OUTPUT CONFIGURATION This page provides the switching, connection input signal information, and the HDBT output connection status. AV Inputs: Select to switch the input. Auto Switch Video: If checked, the device is set in auto switching mode rather than manual mode.
  • Page 12 CONFIGURATION- LBC-HDV-T EDID MANAGEMENT CLICK ON EXTEN- SION MACRO TO EXECUTE/EDIT UP This page provides switching and EDID management. TO 8 MORE MAC- RO ACTIONS, Follow Output: EDID from display. Broadata EDID: Internal preload EDID HDBaseT HDMI/DisplayPort/VGA Transmitter with ICP User Manual (LBC-HDV-T / LBC-HDV-T-ICP)
  • Page 13 CONFIGURATION- LBC-HDV-T RS-232 CONTROL CONFIGURATION RS-232: Local RS-232 setting to control the LBC-HDV-T. HDBT RS-232: Set the far end RS-232 baud rate. RS-232 Preset Command 1: When detecting active signal, sends the RS-232 command in the preset timing. Command 2: When no active signal present, sends the command in the preset timing.
  • Page 14 CONFIGURATION- LBC-HDV-T SYSTEM System and firmware information. User can modify the IP setting on this page. Remember to click on Apply for the changes. HDBaseT HDMI/DisplayPort/VGA Transmitter with ICP User Manual (LBC-HDV-T / LBC-HDV-T-ICP)

  • Page 15: Api Commands

    API COMMANDS Input Select >C Syntax Description >C<param>to1 Selects video inputs Parameter Description Range <param> Input selection number 1 VGA Select 2 HDMI Select 3 DP Select Command Example Command Response Function >C1to1 <C1to1 Change input to HDMI Input Switching Mode >M Syntax Description >M<param>...
  • Page 16 API COMMANDS Query Information Syntax Description #<param> Queries information Parameter Description Range <param> Input selection Query the selected video input mode number Query output resolution MBaud Query the RS232 baud rate MDBits Query RS232 data bit setting MSBits Query RS232 stop bit setting Mparity Query RS232 parity bit setting DHCP Query IP mode...

  • Page 17: Configuration- Lbc-Hdv-T-Icp

    CONFIGURATION- LBC-HDV-T-ICP LBC-HDV-T-ICP CONNECTIONS The LBC-HDV-T-ICP is programmed with a special firmware that allows it to easily integrate with the LBC-H/O-R-ICP. Pairing the LBC-HDV-T-ICP with the LBC-H/O-R-ICP supports the following features: Video input selection using 8-button keypad, touch panel or voice control. Automation triggered by video detect Web server of standard LBC-HDV-T is replaced by LBC-H/O-R-ICP web server...

  • Page 18: Keypad Control

    KEYPAD CONTROL LBC-H/O-R-ICP Web GUI After the LBC-H/O-R-ICP is powered up with the LBC-HDV-T-ICP connected, go to the Configure System page of the LBC-H/O-R-ICP web GUI (See LBC-H/O-R-ICP User Manual for web GUI details). The Tx Unit status should change to LBC-HDV-T-ICP connected, indicating that the LBC-HDV-T-ICP has been connected successfully.
  • Page 19 KEYPAD CONTROL On the top menu bar click on Keypad. The virtual 8 button keypad page shown below will be loaded. Each button on the virtual keypad corresponds to a button on the LB-KP8. By default buttons are not configured and labeled F1 to F8. KGROUND R ALLOWS O INSTANT-...
  • Page 20 KEYPAD CONTROL This page configures each button’s operating mode and assigns an action(s) to a button. Each button can operate as a Standard button or a Toggle button, which has two states, Press and Release. A single action or multiple actions can be assigned to a button. An action can be a native control type such as Relay, Video Control or Audio Control or an external control type such as RS-232, IR or Telnet.
  • Page 21 KEYPAD CONTROL The following configuration sets button, F3, to select the VGA input. In the Edit Button drop down menu, select F3. In the Label field type in VGA. In the Mode drop down menu, select Standard. In the Action Number drop down menu, select Action 1. In Spacing field enter 0.0.

  • Page 22: Touch Panel

    TOUCH PANEL Touch Panel Control The following section provides instructions on how to configure an Android tablet or Apple iPad as a touch panel for controlling the LBC-HDV-T-ICP. Android tablet: Install the BCI Controller App on the tablet (see the BCI Controller App User Manual for installation details).
  • Page 23 TOUCH PANEL In the LBC-H/O-R-ICP web GUI, go to the top menu bar. Click on Configure and then click on System. The Configure System page will be shown. In the System panel, select Keypad Type custom touch panel. Then click on Submit Changes button. Touch Panel Configuration The touch panel is configured in 3 easy steps: Step 1 - Configure buttons...
  • Page 24 TOUCH PANEL Follow the instructions below to configure 3 buttons to control the LBC-HDV-T-ICP input selection on the touch panel. The following configuration defines a button labeled HDMI, which selects the HDMI input. In the Edit Button drop down menu, select Add New Button. In the Name field type in HDMI.
  • Page 25 TOUCH PANEL The following configuration defines a button labeled VGA, which selects the VGA input. In the Edit Button drop down menu, select Add New Button. In the Name field type in VGA. In the Style drop down menu, select Outline Button. In the Idle Color drop down menu, select Blue.
  • Page 26 TOUCH PANEL Follow the instructions below to configure the touch panel page. The following configuration defines a page labeled HDV Input Control that is populated with the 3 buttons created above. In the Edit Page drop down menu, select Page 1. In the Header field type in HDV Input Control.
  • Page 27 TOUCH PANEL Step 3 – Open page in BCI Controller app Launch the BCI Controller app on the Android tablet. The following page will display. The app should show the LBC-H/O-R-ICP. Click on the device. HDBaseT HDMI/DisplayPort/VGA Transmitter with ICP User Manual (LBC-HDV-T / LBC-HDV-T-ICP)
  • Page 28 TOUCH PANEL Click on Open and the HDV Input Control touch panel page will load. HDBaseT HDMI/DisplayPort/VGA Transmitter with ICP User Manual (LBC-HDV-T / LBC-HDV-T-ICP)

  • Page 29: Alexa Voice

    ALEXA VOICE Voice Control (Alexa) Voice control is easily enabled by adding an Amazon Alexa device such as an Echo Dot as shown in Figure C. LBC-HDV-T-ICP LBC-H/O-R-ICP WiFi Internet Router Alexa Device (Echo Dot) Figure C HDBaseT HDMI/DisplayPort/VGA Transmitter with ICP User Manual (LBC-HDV-T / LBC-HDV-T-ICP)
  • Page 30 ALEXA VOICE The following section provides instructions on how to configure the LBC-H/O-R-ICP so that voice can be used to control the LBC-HDV-T-ICP via an Echo Dot. Voice control is configured in 4 easy steps: Step 1: Setup Amazon Echo Dot. Step 2: Download Broadata ICP Controller skill.
  • Page 31 ALEXA VOICE Check the box Check to enable Alexa Integration and then click Submit Changes button. The Connection Status should change to Connected. Click on the Check Status button. The Link Account page will appear. Click on the Link button. The browser will be directed to the Amazon Sign-In page.
  • Page 32 ALEXA VOICE Step 4 - Discover the scenes Selecting the Touch Panel Buttons as the scene name source designates each of the touch panel buttons to be a scene. The scene name corresponds to the button name. In the above Touch Panel Configuration, 3 buttons named HDMI, DP and VGA were configured, so the 3 scene names are also HDMI, DP and VGA.
  • Page 33 ALEXA VOICE Automation is configured in the Automated Control page. On the top menu bar, click on Configure and then click on Automated Control. The Automated Control page will appear. HDBaseT HDMI/DisplayPort/VGA Transmitter with ICP User Manual (LBC-HDV-T / LBC-HDV-T-ICP)
  • Page 34 CONFIGURATION The following configuration sends an RS-232 “power on” string to the monitor connected to the LBC-H/O-R-ICP output when video is detected on any of the LBC-HDV-T-ICP inputs and sends a “power off” string when no video inputs are detected. This configuration requires 3 steps: Step 1 - Configure the “power on”...
  • Page 35 CONFIGURATION Step 2 - Configure the “power off” RS-232 action On the top menu bar, click on Configure and then click on Action Definitions. In the Action Type drop down menu, select RS-232. In the Action drop down menu, select Add New Action. In the Action Label box, type in power off.
  • Page 36 CONFIGURATION Step 3 - Configure video detect to triggered the RS-232 actions On the top menu bar, click on Configure and then click on Automated Control. In the Trigger drop down menu, select Video Detect - Combined. In the Trigger When drop down menu, select Asserted. In the Action Number drop down menu, select Action 1.

  • Page 37: Configuration

    CONFIGURATION In the Trigger When drop down menu, select De-asserted. In the Action Number drop down menu, select Action 1. In Spacing field enter 0.0. In the Action drop down menu, select power off. Click on Submit Changes button. To test the video detect configuration, plug in an HDMI source at the LBC-HDV-T-ICP and confirm that the monitor powers on and displays the HDMI video.

  • Page 38: Specifications

    SPECIFICATIONS VIDEO SPECIFICATIONS PHYSICAL Dimensions Standalone Resolution 7.48”(W) x 4.12”(D) x 1.16”(H) (HDMI) up to 4K2K@30Hz (DisplayPort) up to 4K2K@30Hz Power Consumption +24V DC, 1A (Max) (VGA) up to 1920x1200@60Hz Operating Temperature 0 to 40ºC Connectors HDMI/DisplayPort and VGA Humidity 5 to 95% RH, Non-Condensing Female Plug CERTIFICATIONS...

  • Page 39: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING 3.1 Maintenance There is no operator maintenance other then keeping the units clean. However, observe the following light indicators to make sure that the unit is working properly: 3.2 Troubleshooting If the LBC-HDV-T-ICP units do not operate properly after installation, check for possible cable breaks, loose connections, and incorrect cable connections.

  • Page 40: Service Procedure

    The LBC-HDV-T-ICP contains no user serviceable components. If you have a problem with your unit, please contact the Customer Service Department. To facilitate our return/ repair processing please contact Broadata Communications, Inc. to obtain a Return Material Authorization (RMA). Please include the following information: •...

  • Page 41: Limited Warranty

    LIMITED WARRANTY 6.0 LIMITED WARRANTY Broadata Communications, Inc. (BCI) warrants, for a period of one year from date of ship- ment, each product sold shall be free from defects in material and workmanship. BCI will correct, either by repair, or at BCI’s election, by replacement, any said products that in our sole discretion prove to be defective and are returned to the manufacturing location within 30 days after such defect is ascertained.
  • Page 42 Broadata Communications, Inc. 2545 West 237th Street, Suite K Torrance, CA 90505 1-800-214-0222 (310) 530-1416 (310) 530-5958 (Facsimile) e-mail: Sales@Broadatacom.com 2545 West 237th Street Website: www.broadatacom.com Torrance, CA 90505 800•214•0222 310•530•1416 e-mail: Sales@broadatacom.com www.broadatacom.com 8-Button Wall Plate Ethernet Keypad User Manual (LBC-HDV-T/LBC-HDV-T-ICP)- 60000LBC-HDV-T/ICP...

This manual is also suitable for:

Linkbridge lbc-hdv-t-icp

Table of Contents