Charles FSDC-H Series General Description And Installation page 6

LT-FSDC-H
4 Coil and route fibers inside the tray.
5 Locate the connectorized fanouts that come with the FSDC.
Plug the connectors into the ports on the inside of the FSDC-H
and coil the fanout fibers in the basket beneath the trays.
Use cable ties and Velcro strips to groom, contain, and secure
the fibers as needed.
Route fanout fibers into the tray.
Perform splicing operations between the feed fiber and the
fanout in the tray.
Page 6 of 11
st
1 Printing