Table of Contents
Advertisement
LT-FSDC-H
4.5.3 Pole Mounting with Lag Bolts
To mount the FSDC-H on a pole with lag bolts, order the pole mounting kit 97-FSDCPLKTB,
which includes two mounting brackets.
1.
Attach the pole mounting brackets using the included mounting bolts on the back of
the FSDC (Figure 12).
2.
Position the FSDC-H where it will be mounted and mark the lag bolt positions on the
pole for drilling.
3.
Drill holes for lag bolts.
4.
Use customer supplied hardware to secure the FSDC-H to the pole.
4.5.4 Wall Mounting
The FSDC-H can be wall mounted using the pole mounting bracket kits. To mount horizontally,
use kit 97-FSDCPLKTA (Figure 13). To mount vertically, use kit 97-FSDCPLKTB (Figure 14).
The installer must supply corrosion resistant expansion screws or anchors appropriate for the
wall type (e.g., concrete, brick, wood).
Figure 13
Brackets for Horizontal Mounting
Page 10 of 11
Figure 14
Brackets for Vertical Mounting
Figure 12
Brackets for Pole Mounting
st
1
Printing
Advertisement
Table of Contents
