System Setting - NA-DE M2307ADT User Manual

System setting

In standby status ,short- press
No. Setting items
1 LANGUAGE
2 CHIME TIME
3 CHIME VOLUME
4 RING TYPE
5 DO NOT DISTURB
CAN BE
6
MONITORED
DEVICE
7
ADDRESS
8 PORT4 STATE
MONITOR
9
UNLOCK
PHOTO FOR
10
PHOTO FOR
11
RESTORE
12
DEFAULT
EXTEND DOOR1
13
Intercom ring type
Off by default, at the ringing, intercom between monitors,
broadcast status, the LED indicator will flicker when turn
on "DO NOT DISTURB" function.
Off by default, it can be monitored by other indoor
intercoms in the system when turn on this function.
Room1/2/3/4
Off by Default, please enable this option after Port 1
DOOR1 connecting with doorbell with image capturing function.
Off by Default, please enable this option after Port 2
DOOR2 connecting with doorbell with image capturing function.
0-25 seconds.The extend lock function shall be disabled
if set 0, and it shall be enable if set the value over 0, and
LOCK
the value is the unlock time.
button to enter system setting menu.
Options
Default English(Russian optional)
Default 30seconds, (10 - 60 seconds adjustable)
Default 07, 01 - 10 adjustable.
Door1 ring type
Door2 ring type
Master monitor must be set as ROOM
1, and the option will be yellow if two
monitors set the same address.
None / CCTV1 / CCTV1&2
Press
Restore the system to default settings.
Notes
01 by default, 00-11 optionals
02 by default , 00-11 optionals
03 by default , 00-11 optionals
button to unlock
Page 13