Download Print this page

Accel Instruments TS200 Quick Start Manual

Battery simulator

Hide thumbs Also See for TS200:

Download this manual

Quick Start Guide

Battery Simulator

Step 1-A: Plug in the AC power cord (not shown)

Step 1-B: Turn on the TS200 by press the

LINE button

Step 1-C: Enable the output by press the

ON/OFF button

Step 2: Turn the OFFSET knob to set the simulated battery voltage (e.g. 3.8V)

Step 3: Connect the battery charger to the TS200 OUTPUT

Optional DMM for

Measure Current

1.01

Vary the voltage to observe

the charging current

Accel Instruments

www.accelinstruments.com

Page 1: Quick Start Guide
Step 1-C: Enable the output by press the ON/OFF button Step 2: Turn the OFFSET knob to set the simulated battery voltage (e.g. 3.8V) Step 3: Connect the battery charger to the TS200 OUTPUT Optional DMM for Measure Current 1.01...
Page 2 Quick Start Guide Amplifying Current or Voltage Step 1-A: Plug in the AC power cord (not shown) Step 1-B: Turn on the TS200 by press the LINE button Step 1-C: Enable the output by press the ON/OFF button Step 2: Turn the OFFSET knob to set the DC voltage (e.g. 0V)