Tempest900
4-Channel Quick Start Guide
What's in each box:
BaseStation
• TMP-B409 BaseStation
•
Power Cord
•
Omni-directional Whip antenna
•
3.5mm to 3.5mm 3 conductor data pairing cable
»
Used to pair a BaseStation to the BeltStation(s)
•
USB-A to USB-B cable
»
Used to update BaseStation firmware
•
USB-A to Mini-USB
»
Used to update BeltStation firmware
•
BaseSync cable
»
Used if you have more than one BaseStation
»
Improves RF performance when using multiple systems
•
CD with manual, T-Desk software
BeltStation
•
TMP-R409 BeltStation
•
Li-Poly rechargeable battery
•
5VDC wall charger with Mini-USB connector
Remote Transceiver (optional)
•
TMP-RT09 Remote Transceiver
•
RJ-45 to RJ-45 CAT-5 cable
•
Omni-directional Whip antenna
•
Mounting Plate and screws
5 Bay Battery Charger (optional)
•
TMA-BCHRG-05A Battery Charger
•
AC Cable
Note:
Charge ALL BeltStation batteries prior to set-up.
What else you may need:
•
Headset, one for each user; may be dynamic or electret
microphone, with a 4-PIN XLR female connector
•
3-PIN XLR cables to connect to external 2-Wire Intercom system
•
RJ-45 cables to connect to external 4-Wire Intercom system
•
RJ-45 cable to connect to PC for T-Desk LAN control
Quick Start Guide
1
Need help?
Do you have a question about the 900 and is the answer not in the manual?
Questions and answers