Philips AZ1120/05 User Manual page 4

CONTROLS
TOP AND FRONT PANELS
1 Source selector:
OFF/ TAPE, CD, BAND (FM/ MW) –
to select source of sound, and also the
power OFF switch
2 DBB (Dynamic Bass Boost) – to
enhance bass response
3 VOLUME – to adjust the volume level
4 CASSETTE RECORDER
PAUSE ; – to interrupt recording or
playback
STOP•OPEN 9 / – to stop the tape
and to open the cassette holder
SEARCH 5 or 6 – to fast wind /
rewind the tape
PLAY 1 – to start playback
RECORD 0 – to start recording
5 Remote sensor
6 CD display – to show the CD functions
7 CD PLAYER
STOP 9 – to stop playback
PLAY•PAUSE 2; – to start or interrupt
CD MODE – to select a different play
mode; to programme and review
programmed track numbers
SEARCH ∞/§ – to skip or search a
passage/ track backwards or forward
Environmental information
All unnecessary packaging material has been omitted. The packaging can be easily separated into
three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packing
materials, dead batteries and old equipment.
4
CD play
8 p – 3.5 mm headphone socket
Note: Connecting headphones will mute
the speakers
9 Cassette compartment
0 OPEN – to open/ close the CD door
RADIO
! Tuning dial pointer
@ TUNING – to tune to radio stations
BACK PANEL
# Telescopic aerial – to improve FM
$ Battery door – to open the battery
compartment
% AC MAINS – socket for mains lead
REMOTE CONTROL
1 2; – to start or interrupt CD play
2 9 – to stop playback
3 J/K – to skip or search a passage/ track
backwards or forward
reception