Table of Contents
Advertisement
Functions
ON / SPEED
This button is used to switch the unit ON and to control the speed. By pressing this
button, you can regulate the airflow from LOW, MEDIUM or HIGH depending on your
needs. The unit automatically starts in MEDIUM speed.
MODE
This button is used to switch between pre-set operating modes. By pressing the MODE
button, you can regulate the mode from NORMAL, NATURAL or SLEEP depending on
your needs. The unit automatically starts in NORMAL mode.
UP / DOWN (swing)
This control gives you the option of having the horizontal louvres swing or stationary.
After turning on, the louvres default to 127°. Press the UP / DOWN button and the
louvres will swing between 60° - 127°. Press the UP / DOWN button again and the
louvres will stay at the current angle.
LEFT / RIGHT (swing)
This control gives you the option of having the vertical louvres open or closed. Press
once to turn "ON". Press again to turn "OFF".
TIMER
This evaporative cooler comes with an 8 hour TIMER that allows you to pre-set the
machine to switch off automatically, in intervals of 1, 2, 4 or 8 hours.
To operate, simply select the number of hours ahead you wish the machine to switch
off. If you want it to run continuously, ensure the TIMER mode is deselected.
COOL / HUMDIFY
Press this button to turn on the COOL / HUMIDIFY function, the pump will start and
the COOL / HUMIDIFY LED will illuminate. Press this button again to turn off the COOL
function, and to use as a fan only
OFF
Press this button to switch the unit OFF.
8
Advertisement
Table of Contents
