Maintenance - Dremel PC10 Operating/Safety Instructions Manual

1600A018W0AA 02-18 PC10.qxp_Layout 1 2/7/18 7:28 AM Page 22
radio or television reception, which can be de-
termined by turning the equipment off and on,
the user is encouraged to try to correct the in-
terference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
Service
tive maintenance performed by un au -
thorized personnel may result in misplacing
of internal wires and components which
could cause serious hazard. We recom mend
that all tools that are not operating correctly be
returned to a Bosch/Dremel Service Center.
BATTERIES
Be alert for batteries that are nearing their
end of life. If you notice decreased tool per-
formance or significantly shorter running time
between charges then it is time to replace the
tool.
22
FCC Caution:

Maintenance

NO USER SERVICE-ABLE
PARTS INSIDE. Preven-
• Connect the equipment into an outlet on a
circuit different from that to which the re-
ceiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Cleaning
To avoid accidents, al-
ways be sure the tool is
turned "OFF" before cleaning. Only use a
mild detergent to clean the tool. Do not sub-
merse tool in water.
Certain cleaning agents
and
plastic parts. Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning sol-
vents, ammonia and household detergents that
contain ammonia.
solvents damage