Splash Guard - Dremel PC10 Operating/Safety Instructions Manual

1600A018W0AA 02-18 PC10.qxp_Layout 1 2/7/18 7:28 AM Page 17
accessories in a dry and temperate environment to avoid deterioration.
The Dremel Versa is designed to work with
spray, foam, gel, or liquid cleaners. Before
using cleaning solutions please read and follow
manufacturer's warnings and instructions for
use. Cover the surrounding area that you are
cleaning to protect from spray. Use splash
guard on open surfaces to contain spray. Rec-
ommended to apply water and cleaning agent
to the surface that needs cleaning and/or to the
accessory directly. If applying water or cleaning
agent directly on accessory, shake excess liq-
uid off or "pulse" the tool by quickly turning it
"on" and then "off" in a contained areas (i.e.
bucket or sink) to reduce spray.
To start cleaning, press and release the On/Off
button (Fig. 1) while the accessory is in contact
with the surface to be cleaned. The tool will
come up to speed quickly. Gently press to the
surface to be cleaned, do not press too hard,
let the tool do the work.
To turn the tool off, press and release the on/off
button.
The kit includes a backing pad, splash guard,
and 4 different accessories. Spot-test a small
section of the surface that you intend to clean
for acceptability before cleaning entire job.
Operating Instructions
Use only Dremel , high-performance accessories. Other accessories are not
®
designed for this tool and may lead to personal injury or property damage. Store

SPLASH GUARD

It is recommended to use the splash guard for
all wet cleaning applications. Keep splash
guard in the "extended" position while tool is
running to contain the spray of water and clean-
ing solutions.
VERSA
Extended Position
To get into tighter spaces, the splash guard can
be retracted into the "up" position.
To remove the splash guard entirely, turn the
tool off, unscrew the backing pad (counter-
clockwise when looking at the bottom of the
tool), then twist the splash guard a quarter turn
to remove. Screw the backing pad back on.
VERSA
Retracted Position
17