1. Manuals
  2. Brands
  3. NI Manuals
  4. Power Supply
  5. PXIe-1075
  6. User manual

NI PXIe-1075 User Manual

Power supply shuttle
Hide thumbs Also See for PXIe-1075:
Table of Contents

Advertisement

Quick Links

Download this manual

USER GUIDE

NI PXIe-1075 Power Supply Shuttle
This power supply is not compatible with any other National Instruments chassis.
Caution
Introduction
Unpacking
The NI PXIe-1075 power supply shuttle is a replacement part for the
NI PXIe-1075 chassis.
To minimize downtime caused by a power-supply failure, the
NI PXIe-1075 chassis has a modular power supply shuttle. This power
supply shuttle includes the chassis power supply, cooling fans, and
fan-control circuitry. Key features of the power supply shuttle include:
•
Universal AC input with automatic voltage and frequency ranging
•
Over-current protection via push-reset circuit breaker
•
Remote power monitoring and inhibit via a rear-panel connector
•
Temperature-sensing module that can adjust fan speed based on
air-intake temperature to minimize audible noise
•
Circuitry to control a front-panel LED that indicates power supply
failure
Carefully inspect the shipping container and the power supply shuttle for
damage. Check for visible damage to the metal work. Check to make sure
all handles, hardware, and switches are undamaged. Visually inspect the
inside of the shuttle for any possible damage, debris, or detached
components. If damage appears to have been caused during shipment, file
a claim with the carrier. Retain the packing material for possible inspection
and/or reshipment.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXIe-1075 and is the answer not in the manual?

Questions and answers

Related Manuals for NI PXIe-1075

Summary of Contents for NI PXIe-1075

  • Page 1: User Guide

    USER GUIDE NI PXIe-1075 Power Supply Shuttle The NI PXIe-1075 power supply shuttle is a replacement part for the NI PXIe-1075 chassis. This power supply is not compatible with any other National Instruments chassis. Caution Introduction To minimize downtime caused by a power-supply failure, the NI PXIe-1075 chassis has a modular power supply shuttle.

  • Page 2: What You Need To Get Started

    ❑ NI PXIe-1075 power supply shuttle ❑ Read Me First: Safety and Electromagnetic Compatibility ❑ NI PXIe-1075 User Manual (provided with the chassis; also available ni.com/support ❑ #1 Phillips screwdriver Description Refer to Figure 1 to locate user-accessible components on the power supply shuttle.

  • Page 3: Installation And Maintenance

    Do not use, test, or configure the power supply shuttle outside of a chassis. The power supply shuttle is a replacement part for the NI PXIe-1075 chassis. The NI PXIe-1075 User Manual contains all of the most up-to-date chassis service procedures, including removal and replacement of power supply shuttles.

  • Page 4: Power Cord

    The power supply shuttle will not power up unless connected to the backplane in a Note functional NI PXIe-1075 chassis. Power Cord For 100–120 VAC installation, use gray power cords rated for 125 V/15 A, using the NI cable part numbers listed in the following table. Country NI Part Number North America 763830-01...

  • Page 5: Specifications

    For more information, refer to the Inhibit Mode Switch section of Chapter 2, Installation and Configuration, in the NI PXIe-1075 User Manual. The operating range is guaranteed by design. © National Instruments Corporation NI PXIe-1075 Power Supply Shuttle User Guide...
  • Page 6 PXI-1 Peripheral Hybrid Peripheral Slot with PXI-5 (PXI Express) Peripheral PXI-1 Peripheral Slot 11 A Load regulation Voltage Load Regulation +3.3 V <5% +12 V <5% +5 V <5% –12 V <5% NI PXIe-1075 Power Supply Shuttle User Guide ni.com...

  • Page 7: Where To Go For Support

    (EMC) and product safety. You can obtain the DoC for your product by visiting . If your ni.com/certification product supports calibration, you can obtain the calibration certificate for your product at ni.com/calibration © National Instruments Corporation NI PXIe-1075 Power Supply Shuttle User Guide...
  • Page 8 Turkey 90 212 279 3031, United Kingdom 44 (0) 1635 523545 National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Table of Contents