Before using the remote control
1
Pull out the plastic protective sheet.
2
Select the source you wish to control by pressing
one of the source select keys on the remote
control (for example CD, TUNER).
3
Then select the desired function (for example
É Å, S, T).
Replacing battery (lithium
CR2025) into the remote control
1
Pull out the knob A slightly to the left.
2
Pull out the battery compartment B.
3
Replace a new battery and fully insert the
battery compartment back to the original
position.
CAUTION!
Batteries contain chemical substances,
so they should be disposed of properly.
Placing the mains adapter
●
Place the mains adapter as close as possible to
the power supply.
●
Do not place this unit in closed spaces, cover it
or block the air vents.
●
Do not insert or drop anything into this unit
through the air vents as this could cause serious
damage.
Preparations
plastic
protective
sheet
A
B
9