Advertisement
English
Supplied Accessories
– AC power cord
Top and front panels (See 1)
1 VOLUME – adjusts volume level.
2 BASS BOOST – turns the bass enhance-
ment on/off.
3 Source selector: CD,TUNER,TAPE/OFF
– selects CD, radio or tape source of sound
– power off switch
4 BAND – selects waveband
5 TUNING – tunes to radio stations
6 LIFT TO OPEN – opens/ closes the CD
door.
7 CASSETTE RECORDER keys:
PAUSE– pauses playback or recording
STOP•EJECT – stops the tape;
– opens the cassette holder.
F.FWD / REW – fast winds/ rewinds tape;
PLAY – starts playback;
REC – starts recording.
8 2 PLAY / ; PAUSE - starts or pause CD
playback
9 9 STOP – stops CD playback;;
– erases a CD program
0 FM ST. indicator – lights up for stereo FM
reception.
! § NEXT, ∞ PREVIOUS
– selects the next/previous track
– searches forwards/backwards (press and
hold the button) within the current track
@ PROG – programs tracks and reviews the
program
# POWER indicator – lights up when the set
is powered on.
$ REPEAT – repeats a track/
CD program/entire CD.
% Display – shows the CD functions
Controls/Power Supply
Back panel (See 2)
^ Telescopic antenna - improves FM
reception.
& p – 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
* AC ~ - inlet for power cord.
( Battery door - open to insert 6 x 1.5V
R-14/ UM-2/ C-cells.
CAUTION
Use of controls or adjustments or per-
formance of procedures other than
herein may result in unsafe operation.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1 Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "–" symbols inside the com-
partment. (See 2)
2 Replace the battery door, making sure the bat-
teries are firmly and correctly in place.The set is
now ready to operate.
Batteries contain chemical substances, so
they should be disposed of properly.
Power Supply
•
Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to burst:
•
Do not mix battery types: e.g. alkaline with car-
bon zinc. Only use batteries of the same type
for the set.
•
When inserting new batteries, do not try to mix
old batteries with the new ones.
•
Remove the batteries if the set is not to be used
for a long time.
Using AC power
WARNING: Always check you have
completely switched off the set, before you
change or disconnect power supply.
1 Check if the power voltage, as shown on
the type plate located on the
rear of the set, corresponds to your local
power supply. If it does not, consult your deal-
er or service center.
2 Connect the power cord to the AC ~ inlet
and the wall socket.The set is now connected
and ready for use.
3 To switch the set off completely, withdraw the
power cord from the wall socket.
•
Disconnect the power cord from the wall
socket to protect your set during heavy
thunderstorms.
The type plate is located on the
rear of the set.
Helpful hints:
– To avoid unnecessary energy consumption,
always adjust the Source selector to
TAPE/ OFF after using the set. Also check
that the tape deck keys are released.
General Operation/Tuner
General operation
1 To select your sound source, adjust the
Source selector to: CD, TUNER or
TAPE/ OFF.
2 To switch off the set, adjust the Source
selector to TAPE/ OFF position and
check the cassette keys are released.
Adjusting volume and sound
Adjust the sound with the VOLUME and
BASS BOOST controls.
Radio reception
1 Adjust the Source selector to TUNER.
2 Adjust BAND to select your desired
waveband, MW, or FM ST. (stereo)
3 Turn TUNING to tune to a station.
- FM ST. indicator lights up for stereo FM
reception.
To improve radio reception:
•
For FM, extend and turn the telescopic
antenna for best reception. Reduce its length
if the signal is too strong.
To tune to a weak FM station, adjust BAND
to FM (mono).
•
For MW, the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.
Advertisement
