Charger Specifications - Kodak UC103 Quick Start Manual

Power Provided
Input Voltage
Max Current
Input Connector Type
Frequency
Protection
Workable Temperature
SUCTION BASE INSTALLATION
1 - Select a location to install the holder and clean the area
where suction base will be placed.
2 - Unlock the suction lever.
3 - Peel out the gel pad protection clear sheet.
Refer to image 6.

CHARGER SPECIFICATIONS

Protection Clear Sheet
5W
4.75 - 5.25 V
1.5A
Micro USB
87 - 205 KHz(Qi Standard 1.2.4)
Over and Low Voltage
Over and Low Currency
Over Heat
Foreign Object Detection
Over Distance
-10~28 ℃
Suction Base
Sticky Gel Pad
image 6
05