Using The Appliance; Before First Use - EC Data RK 1785 KE colore Instruction Manual

were instructed how to use the appliance safely and understand
potential dangers. Children must not play with the appliance.
CAUTION
• You may not use the kettle to heat any other liquids than water. Never put in the kettle tea bags, loose tea
or any other ingredients for making beverages.
• Always use cold water when filling the kettle.
• The water level must be between the minimum and maximum levels. Risk of water splashing out when
the kettle is overfilled.
• Always switch the kettle off before removing it from the base.
• Always make sure the lid is well closed.
• The base and kettle body should not be wet.
• Only use the kettle in combination with its original base.
GB

USING THE APPLIANCE

Before first use

Fill the kettle with clean, cold and potable water up to max. level before first use, switch it on and bring the
water to a boil. Then pour the water out and repeat the procedure at least five times. It is also recommended
the leave the empty kettle open for 24 hours. The kettle material coming into contact with water is certified as
harmless to health.
• Once the water begins to boil, the kettle automatically switches off.
• Do not open the lid when pouring water from the kettle.
• Unplug the cord from the outlet when you are finished using the appliance.
• The kettle is equipped with an automatic safety circuit, which protects the appliance against overheating.
The circuit is activated when the kettle, containing an insufficient amount of water, is switched on. If the
automatic safety circuit was activated, switch the kettle off, unplug the appliance from the power supply
and allow it to cool down for 5 to 10 minutes. You can then refill the kettle with water and use the appliance
as you normally would.
Basic use
1. Place the base on a dry and flat surface and plug the power cord into the outlet. Place the kettle on its base.
2. Press shortly, you will hear a sound and the heating process will start. The default temperature is set to
100 °C and the indicator is red.
3. Once the water is heated, the kettle will be switched off, the indicator will be turned off and you will hear
a sound.
4. Unplug the cord from the outlet when you are finished using the appliance.
Advanced functions
1. Press for 3 seconds, you will hear a sound and the water heating process will start, the LED indicator will
flash red. Once the water boils (100 °C) the kettle will maintain the water temperature for a 2 hour period
and the indicator will flash. During these two hours, the heating process will activate when the water
temperature drops below 85 °C.
2. Press once, the 60 °C indicator will light up. The heating indicator will turn green and the water will be
heated to 60 °C.
3. Press twice, the 70 °C indicator will light up. The heating indicator will turn blue and the water will be
heated to 70 °C.
4. Press three times, the 80 °C indicator will light up. The heating indicator will turn yellow and the water
will be heated to 80 °C.
28
Do not immerse in water!