Mounting Cabinets
Use stud finder to locate the studs
7
and mark the wall with a pencil.
9
Near the top of the cabinet, drill 1/4" holes through the back of the cabinet that are in line with
marked studs. Repeat for drilling two holes near the bottom of the cabinet.
Place cabinet flush against wall and
10
attach using screws and washers.
8
4 x Lag Screw
6mm x 55mm
Pilot Holes
11
Gather parts.
4 x Threaded
Washer
Use threaded caps to cover screws.
4 x Threaded
Caps