Notices To The User; Unpacking And Checking Equipment; Installation - Kenwood TKR-D810 Instruction Manual

VHF DIGITAL REPEATER/ UHF DIGITAL REPEATER
TKR-D710/ TKR-D810
INSTRUCTION MANUAL
THANK YOU!
We are grateful you purchased this KENWOOD repeater. We
believe this easy-to-program repeater will be highly eff ective in
your communications system, and will keep personnel operating
at peak effi ciency.
PRECAUTIONS
• Do not expose the unit to rain or moisture; to prevent fi re or
electric shock.
• Do not open the unit under any circumstances; to avoid risk of
electric shock.
• Do not expose the unit to long periods of direct sunlight, nor
place it close to heating appliances.
• Do not place the unit in excessively dusty and/or humid areas,
nor on unstable surfaces.
• If you detect an abnormal odor or smoke coming from the unit,
disconnect the power from the unit immediately. Contact your
KENWOOD service center or dealer.

NOTICES TO THE USER

◆ Government law prohibits the operation of unlicensed radio
transmitters within the territories under government control.
◆ Illegal operation is punishable by fi ne and/or imprisonment.
◆ Refer service to qualifi ed technicians only.
◆ This repeater is intended for use as a fi xed base station with
the antenna located outdoors on the rooftop or on an antenna
tower.
◆ This repeater is designed for a 13.2 V DC power source!
Never use a 24 V DC or higher source to power the repeater.
◆ Use only the supplied DC cord.
◆ Do not remove the ferrite core attached to the DC cord. Doing
so may cause interference with radio communications.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin)
cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled
at a facility capable of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility
nearest to you.
Proper recycling and waste disposal will help conserve resources whilst
preventing detrimental effects on our health and the environment.
NOTIFICATION
This equipment complies with the essential requirements of Directive
2014/53/EU.
This equipment requires a licence and is intended for use in the
countries as below.
AT BE DK FI
IT LI LU NL
GB CY CZ EE
SK SI BG RO
FR DE GR IS
NO PT ES SE
HU LV LT MT
HR TR

UNPACKING AND CHECKING EQUIPMENT

Note: The following unpacking information is for use by your
KENWOOD dealer, an authorized KENWOOD service center, or the
factory.
Carefully unpack the repeater. We recommend that you identify
the items listed in the following table before discarding the packing
material. If any items are missing or have been damaged during
shipment, fi le a claim with the carrier immediately.
Hardware fi xture
Front glass
Name plates
Cushion
Cushion
Foot
Foot
Grommet
Handle
Screws
Screws
DC cord
Lead wire with connector (15 pin)
Fuse
Instruction Manual

INSTALLATION

To install the handles onto the front panel of the repeater, align the
handles with the holes on the front panel, then secure the handles
using the supplied screws.
Please consult your dealer for installing the repeater and antenna.
The AMBE+2 TM
is protected by intellectual property rights including patent rights,
IE
copyrights and trade secrets of Digital Voice Systems, Inc. This
CH
voice coding Technology is licensed solely for use within this
PL
Communications Equipment. The user of this Technology is explicitly
prohibited from attempting to extract, remove, decompile, reverse
ISO3166
engineer, or disassemble the Object Code, or in any other way
convert the Object Code into a human-readable form. U.S. Patent
Nos. #8,315,860, #8,595,002, #6,199,037, #6,912,495, #8,200,497,
#7,970,606, and #8,359,197.
Firmware Copyrights
The title to and ownership of copyrights for fi rmware embedded in KENWOOD
product memories are reserved for JVC KENWOOD Corporation.
1
Item Part Number
J21-8559-XX
B10-2635-XX
B11-1259-XX
G13-1801-XX
G13-1802-XX
J02-0475-XX
J02-0492-XX
J59-0302-XX
K01-0418-XX
N30-4006-XX
N35-3006-XX
E30-3427-XX
E31-3228-XX
F05-1537-XX
B5A-0005-XX
voice coding Technology embodied in this product
Quantity
1
1
1
4
4
2
2
2
1
2
5
1
1
1
1