Lifting and Moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless of
its type and size.
• It is recommended to move the TV in the box or
packing material that the TV originally came in.
• Before moving or lifting the TV, disconnect the
power cord and all cables.
• When holding the TV, the screen
should face away from you to
avoid damage.
• Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grille area.
• Use at least two people to move
a large TV.
• When transporting the TV by
hand, hold the TV as shown in the
following illustration.
• When transporting the TV, do not expose the TV
to jolts or excessive vibration.
• When transporting the TV, keep the TV upright;
never turn the TV on its side or tilt towards the
left or right.
• When handling the TV, be careful not to damage
the protruding buttons.
• Avoid touching the screen at all times, as
this may result in damage to the screen.
• Do not place the product on the floor with
its front facing down without padding.
Failure to do so may result in damage to the
screen.
• Do not move the TV by holding the cable
holders, as the cable holders may break,
and injuries and damage to the TV may
occur. (Depending upon model)
Using the Button
You can operate the TV by pressing the button.
Basic Functions
Power On (Press)
Power Off
1
Menu control (Press
Menu selection (Press and Hold
1 All running apps will close.
2 You can access and adjust the menu by pressing
the button when TV is on.
3 You can use the function when you access menu
control.
Adjusting the Menu
When the TV is turned on, press the
time. You can adjust the Menu items using the
button. (Depending upon model)
Turns the power off.
Changes the input source.
Scrolls through the saved channels.
Adjusts the volume level.
(Press and Hold)
)
2
)
3
button one
5
Need help?
Do you have a question about the 43LJ5500 and is the answer not in the manual?
Questions and answers
how to connect this tv to my sonosbose surround bar with the optical cable I can't seem to connect
To connect the LG 43LJ5500 TV to a Sonos or Bose surround bar using an optical cable, follow these steps:
1. Locate the Optical Port: Find the optical (TOSLINK) port on the back of the TV and the surround bar.
2. Connect the Cable: Insert one end of the optical cable into the TV’s optical output port and the other end into the surround bar’s optical input port.
3. Select Optical Output on TV: Go to the TV’s settings, navigate to the audio output settings, and select "Optical" or "Digital Audio Out."
4. Adjust Sound Settings: Set the TV’s audio format to PCM if needed, as some surround bars may not support Dolby Digital.
5. Enable External Audio: If necessary, disable the TV speakers in the sound settings to allow audio to play through the surround bar.
This setup ensures proper audio transmission from the TV to the surround bar.
This answer is automatically generated