Advertisement
Available languages
Available languages
2.-4
Insert plastic bearing (DD) into both sides of the lower glider leg tube (X) and
fix glider seat tube (Y), using bolt set (bolt Fx1 + washer Kx2 +
spring washer Mx1 + domenut Px1).
To ensure the concavity side of glider set tube face down as below.
2.-5
Fix glider seat (AA) to glider seat tube (Y) using bolt set (bolt Cx1 +
washer Jx1 + spring washer Lx1 + domenut Ox1.)
2.-6
Attach glider footrest (BB) to lower glider leg tube (X) using bolt set
(bolt FFx1).
Step 3
Assembling The Swing Seat X 2
3.-1
Attach swing seat (CC) to top bar (S) using U bolt set (U bolt EEx1 +
washer Kx4 + spring washer Mx2 + nut Qx2 + domenut Px2).
3.-2
Attach the other swing seat (CC) to top bar (S) using U bolt set (U bolt EEx1
+ washer Kx4 + spring washer Mx2 + nut Qx2 + domenut Px2).
Step 4
Assembling The Lawn Swing
4.-1
Combine glider bracket Z to top bar S. using bolt set
(bolt Ax1 + washer Jx2 + spring washer Lx1 + domenut Ox1).
Insert plastic bearing (DD) into both sides of the handrail tube (LL) and attach
bracket (Z), using bolt set (bolt Hx1 + washer Kx1 + spring washer Mx1 +
to domenut Px1)
4.-2
Insert floor support tube with V-clip (MM) into Seat tube (NN2)
The concavity side of glider seat tube (Y) face down.
Page 9 of 51
Advertisement
