Advertisement
Available languages
Available languages
4.-3
Attach lawn swing seat panel (KK) to middle tube (NN), Seat back tube (NN1)
& Seat Tube (NN2) using bolt set(sexy bolt FF + washer Jx4).
4.-4
Put floor support tube (MM) under lawn swing seat panel (KK), fixing them by
using bolt set (sexy bolt FF + washer Jx4).
Fix floor support tube (MM) to middle tube (NN) by using
sexy bolt FF + washer Jx4
4.-5
Attach middle tube (NN) to handrail tube (LL), using bolt set
(bolt Cx1 + washer Jx1 + spring washer Lx1 + domenut Ox1).
Step 5
Assembling The Gound Anchors
5.-1
Fix ground anchor R into bottom hole of each 4 leg, using bolt set
(bolt Bx1 + washer Jx1 + spring washer Lx1 + domenut Ox1).
5.-2
Dig 40cm depth cave and put cement in size 35x35x30cm (LxWxH).
Take ground anchor R into cement when cement is soft.
5.-3
Make sure ground anchor R is well fixed into cement to prevent this product
overturning. When cement is hard, cover the cave with soil.
5.-4
When selecting a place to install the equipment, take into account the space
required for the training activity. Allowing a margin of at least 2 m on all sides.
For this reason, avoid positioning the equipment near protruding elements,
walls, treescape, etc.
5.-5
Once the equipment has been assembled, make sure that it is placed
safely and completely stable, never on carpet (it must be
perfectly stable, not least under conditions of maximum load).
4.-2
4.-3
4.-4
Page 10 of 51
4.-5
Advertisement
