Troubleshooting
The remote control does not function
properly.
The time is not working.
Not all lighted buttons are showing light.
The Clock/Timer setting is erased.
The system displays features
automatically and buttons start flashing.
30
✔
Select the source (CD or TUNER, for example)
before pressing the function button (É Å ).
✔
Reduce the distance between the remote
control and the system.
✔
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
✔
Replace the batteries.
✔
Point the remote control directly towards the IR
sensor.
✔
Set the clock correctly.
✔
Press and hold CLOCK•TIMER to switch on
the timer.
✔
If recording is in progress, stop recording.
✔
Press DIM to select DIM OFF display mode.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
Press and hold 9 on the system to switch off
✔
the demonstration.